On September 26, 2024, the US Department of Commerce’s Bureau of Industry and Security (BIS) Office of Information and Communications Technology and Services (OICTS) published a notice of proposed rulemaking (the “Proposed Rule”) titled “Securing the Information and Communications Technology and Services Supply Chain: Connected Vehicles.”
The Proposed Rule builds on the advance notice of proposed rulemaking (ANPRM) released on March 1, 2024, and focuses on vehicle connectivity system (VCS) hardware as well as VCS and Automated Driving Systems (ADS) software in which there is a foreign interest (“Covered Software”) and that are “designed, developed, manufactured, or supplied by persons owned by, controlled by, or subject to the jurisdiction or direction” of the People’s Republic of China (China) and Russia. The Proposed Rule also precludes connected vehicle manufacturers that are owned or controlled by or subject to the jurisdiction or direction of China and Russia from selling in the United States completed connected vehicles that incorporate VCS hardware or Covered Software, regardless of their origin.
The proposed prohibitions and compliance obligations related to VCS hardware, Covered Software, and completed connected vehicles incorporating the hardware and software, and the phased-in implementation plan are discussed in greater detail below. Highly anticipated, the proposed rule is likely to have a significant effect in the US automotive sector’s supply and distribution chains for years to come.
Following previous rulemaking identifying China and Russia as “foreign adversaries” and Executive Order 13973 authorizing the Secretary of Commerce to identify and address information and communications technology and services (ICTS) transactions involving foreign adversaries, the March ANPRM (discussed in our Legal Update), identified national security risks stemming from connected vehicle systems with vulnerabilities that could be exploited by malign foreign actors. The Proposed Rule focuses on China and Russia, noting these countries’ ability to “leverage domestic legislation and regulatory regimes to compel companies subject to their jurisdiction, including carmakers and their suppliers, to cooperate with security and intelligence services.”
To address the national security concerns previously identified by BIS,1 the Proposed Rule prohibits three categories of activity (collectively, the “Prohibited Transactions”) involving VCS hardware2 or Covered Software:3
Violations of these prohibitions entail significant civil penalties as well as criminal penalties, including imprisonment, depending on the facts and circumstances.
BIS has clarified that “connected vehicle” applies only to road vehicles (e.g., passenger vehicles, motorcycles, buses, small and medium trucks, class 8 commercial trucks, recreational vehicles), not rail vehicles or unmanned aerial vehicles. BIS anticipates that, based on industry trends, nearly all new vehicles sold in the United States will be captured by “connected vehicle.” Furthermore, VCS hardware and software are only covered when they enable transmission, receipt, conversion, or processing of radio frequency communications at a frequency over 450 megahertz (which excludes those ICTS that pose a lower risk, such as electronic key fobs or tire pressure monitoring systems).
BIS officials are reportedly hoping to finalize the rule as early as January 2025, although the timing remains uncertain. BIS will consider comments filed through the end of the comment period and publish any final rule in the Federal Register. If adopted, the final rule would take effect 60 days after publication in the Federal Register, and BIS currently intends to phase-in implementation of the various compliance obligations described below as follows:
For purposes of these prohibitions, persons owned by, controlled by, or subject to the jurisdiction or direction of China or Russia is very broadly defined to include:
BIS proposes a number of mechanisms for compliance with those prohibitions:
BIS also proposes two processes to assist potentially impacted parties:
The scope and potential industry impacts of the Proposed Rule are considerable and will shape the connected vehicle industry for years to come. If adopted, the Proposed Rule will force VCS hardware importers and connected vehicle manufacturers to closely scrutinize and, as necessary, rearrange their supply chains.
These efforts will likely spill over well beyond VCS hardware and Covered Software and into other automotive parts, putting them at risk of further rulemaking. Implementation of the Proposed Rule may also result in commercial litigation related to long-term supply agreements (including those in place for Covered Software or hardware or vehicles containing them) as a result of these restrictions and the relatively short compliance timeline.
Affected parties are strongly encouraged to carefully review the Proposed Rule and consider business impacts, including future requirements to seek authorizations.
BIS is seeking comments from interested parties through October 28, 2024.
1 The Proposed Rule defines a “connected vehicle” as an on-road vehicle that “integrates onboard networked hardware with automotive software systems to communicate via dedicated short-range communication, cellular telecommunications connectivity, satellite communication, or other wireless spectrum connectivity with any other network or device.”
2 The Proposed Rule defines “VCS hardware” as “the following software-enabled or programmable components and subcomponents that support the function of Vehicle Connectivity Systems or are part of an item that supports the function of Vehicle Connectivity Systems: microcontroller, microcomputers or modules, systems on a chip, networking or telematics units, cellular modem/modules, Wi-Fi microcontrollers or modules, Bluetooth microcontrollers or modules, satellite navigation systems, satellite communication systems, other wireless communication microcontrollers or modules, and external antennas. VCS hardware does not include component parts that do not contribute to the communication function of VCS hardware (e.g., brackets, fasteners, plastics,
and passive electronics).”
3 The Proposed Rule defines “covered software” as “the software-based components, in which there is a foreign interest [emphasis added], executed by the primary processing unit of the respective systems that are part of an item that supports the function of Vehicle Connectivity Systems or Automated Driving Systems at the vehicle level. Covered software does not include firmware, which is characterized as software specifically programmed for a hardware device with a primary purpose of controlling, configuring, and communicating with that hardware device. Covered software also does not include open-source software that can be freely used, modified, and distributed by anyone, with both access to the source code and the ability to contribute to the software's development and improvement unless that open-source software has been modified for proprietary purposes and not redistributed or shared.” In turn, “foreign interest” for these purposes is defined as “any interest in property of any nature whatsoever, whether direct or indirect, by a non-US Person.” This would include, without limitation, any interest through ownership, intellectual property, contract, profit-sharing, or fee arrangement, as well as any other cognizable interest.
Mayer Brown is a global legal services provider comprising associated legal practices that are separate entities, including Mayer Brown LLP (Illinois, USA), Mayer Brown International LLP (England & Wales), Mayer Brown Hong Kong LLP (a Hong Kong limited liability partnership) and Tauil & Chequer Advogados (a Brazilian law partnership) (collectively, the “Mayer Brown Practices”). The Mayer Brown Practices are established in various jurisdictions and may be a legal person or a partnership. PK Wong & Nair LLC (“PKWN”) is the constituent Singapore law practice of our licensed joint law venture in Singapore, Mayer Brown PK Wong & Nair Pte. Ltd. Mayer Brown Hong Kong LLP operates in temporary association with Johnson Stokes & Master (“JSM”). More information about the individual Mayer Brown Practices, PKWN and the association between Mayer Brown Hong Kong LLP and JSM (including how information may be shared) can be found in the Legal Notices section of our website.
“Mayer Brown” and the Mayer Brown logo are trademarks of Mayer Brown.
Attorney Advertising. Prior results do not guarantee a similar outcome.